Rack and pinion steering in 77 Trans am
#1
On The Tree
Thread Starter
Join Date: Sep 2003
Location: Gainesville, Tx
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Rack and pinion steering in 77 Trans am
Just wondering. But has anyone done a rack and pinion conversion on any 1970-1980 camaros/trans am's? If so. Do you have any pics of how you have it mounted and installed. Thanks
#2
TECH Veteran
iTrader: (1)
DSE (Detroit Speed & Engineering) makes an updated subframe with R&P steering for the '70-'81 f-bods, but it's fairly costly. Don't know if it's set up to take a Pontiac engine, but that should be a simple change. It does, however, also get you a 'Vette front suspension set up.
I seem to recall seeing something about a 2nd gen f-bod R&P conversion in a "new parts" section of a magazine recently, but don't exactly recall either the mag or vendor. (I'm having a senior moment) The most recent mags I've looked at are the newest issues of Car Craft and High Performance Chevy. As I said, I don't quite recall the supplier, however Steeroids or Flaming River Industries are sticking in my mind for some reason...
Good luck with your T/A. I had a '77 T/A for MANY years...fun cars!
I seem to recall seeing something about a 2nd gen f-bod R&P conversion in a "new parts" section of a magazine recently, but don't exactly recall either the mag or vendor. (I'm having a senior moment) The most recent mags I've looked at are the newest issues of Car Craft and High Performance Chevy. As I said, I don't quite recall the supplier, however Steeroids or Flaming River Industries are sticking in my mind for some reason...
Good luck with your T/A. I had a '77 T/A for MANY years...fun cars!