PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

DTC P0333 Knock Sensor 2 Circuit High Input (Bank 2)

Thread Tools
 
Search this Thread
 
Old 07-23-2005, 08:31 AM
  #1  
Teching In
Thread Starter
 
cfair's Avatar
 
Join Date: Jul 2005
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default DTC P0333 Knock Sensor 2 Circuit High Input (Bank 2)

Popped this last night. Nothing unusual about the circumstances, just happened while driving across town. I drove the car 4 times after it popped the SES light and the code was set P0333 pending. I had it scanned at autozone and the guy went ahead and reset it. Thinking it could possibly be gas or maybe the sensor could be on the fritz. Luckily I was below a quarter tank so I was able to fill it up with fresh gas. I'll know for sure if something is wrong if it pops while I'm driving around today, but just to be on the safe side I thought I'd run this by you guys for other ideas.

Thanks,

Chris
Jacksonville, FL
'99 Z-28 - Auto



Quick Reply: DTC P0333 Knock Sensor 2 Circuit High Input (Bank 2)



All times are GMT -5. The time now is 08:31 AM.