11 Second Club Snake eyes are a good thing

My vette 11.1@127 N/A 6800+ DA

Old 05-06-2012, 02:53 AM
  #1  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default My vette 11.1@127 N/A 6800+ DA

Finally after 2+ years I got the chance to go to the track in my Z06. Neither me nor the car was ready for this LOL.

I picked up the car at 1am, 7 hours before the track. A big Thanks to Bret and the guys at Racing Engine Design in Colorado for staying that late to finish the car!!!! I had my roll-bar installed, new fuel system, and couple other things.

Car was not tuned with the new fuel system. I was seeing about 0.9 Deg knock in 2nd gear and 2.1 degs in 3rd and 4th. not sure if it pulls a lot of timing with that little knock or not. hopefully will get it tuned when my nitrous system is ready. I know its not really a smart thing to do without checking the tune, but I did a log and only saw little knock so I thought it will be fine especially since I am not running a lot of timing with the current setup/tune and it was actually rich.

car made ~505whp uncorrected in Nov 2011. but the tune was not changed ever since (New CAI, new fuel system, and few other minor things).

My best for the day was 11.1@127mph with a 1.77 60ft. 2nd gear burnout, 5200 Launch RPM. This was with no power shifting at all and kinda slow shifts (check the vid). I was doing 6400-6500RPM shifts since the car was not tuned. I should have went higher maybe 6800 or so but oh well.... when I am sure the tune is ok and everything is perfect I will beat the hell out of the car and try everything.

DA was about 6800ft. I was really holding the car back due to my driving experience. I have no doubts that the car would have run a 10.8 with a good driver in that same day. if not even better! I just couldnt. I sucked really at everything I couldnt even do a decent burnout

I really didnt feel good about this day at all and I was tired (only slept for 3 hours!) which was the biggest struggle I faced. I was scared of breaking something considering my luck in the past and no matter what I did, I just couldnt relax. I never felt that way in the past!! never!! I always drive the car like I stole it haha but couldn't do it this time. which I kinda understand since I have a lot of money into the car and engine. and this was the first time ever to race it and test it all.

I broke my main belt in my third run which made me even more scared of running the car. I have not raced this car AT ALL after the build (over 2 years!!) not even in the streets, which I guess was the main reason why I was feeling that way. you guys should have seen me, I couldnt stop shaking when I was pulling to the tree. especially the first few runs LOL

But I feel more confident in the car now. and I think I will be more relaxed next time I am out!!!

I managed to do a total of 9 runs. but only about 5 complete runs. I still need to figure out tire pressure and launch RPM, but I think I kinda have an idea now. with a little more practice and seat time, I think I will be able to run 10.9-10.8 with a good 60ft (or better!).


here is a quick vid I made (I dont have my best run on vid)


Track info:

- Bandimere Speedway in Colorado
- Elevation: 5800ft
- 04/07/2012
- DA: 6500-7000ft (Best I have seen!)

Car info:

- 2007 C6 Z06
- T56 Trans
- 441ci
- Heads/Cam/Intake
- Bolt-ons
- RPS BC3
- Complete Stock Suspension
- 615whp/583wtq SAE Corrected (505whp uncorrected:ack
- 18" Drag Radials on a C5Z wheels (19psi on my best run, 5000RPM)
- Stock front wheels with PS2 (30psi)
- Full Weight - 3320lbs











go to Youtube to watch it in Full HD

http://www.youtube.com/watch?v=hrhjgmAYrOg


10s coming soon I hope with more seat time and a lot more practice! and hopefully 9s with some nitrous (assuming I will be driving better than this )

:thumbs:
Old 05-06-2012, 04:59 PM
  #2  
Teching In
 
Slapattack's Avatar
 
Join Date: Apr 2012
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice. That is really impressive. Now go get that 10sec slip.
Old 05-06-2012, 05:50 PM
  #3  
Teching In
iTrader: (4)
 
69x22's Avatar
 
Join Date: Oct 2007
Location: Danbury Texas
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts

Default

Not bad! Beautiful car you have there.
Old 05-06-2012, 05:51 PM
  #4  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

Thanks I will try.... was hoping to get it that day because im thinking about changing my setup a little...... we will see how it goes.
Old 05-27-2012, 11:12 AM
  #5  
On The Tree
iTrader: (8)
 
98silvermaro's Avatar
 
Join Date: Jul 2010
Location: Norcross, GA
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
Default

very nice man
Old 05-27-2012, 03:46 PM
  #6  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

thanks..... cant wait to get my 10s slip so that I can start sprying this thing
Old 06-03-2012, 08:13 PM
  #7  
gad
Teching In
iTrader: (-1)
 
gad's Avatar
 
Join Date: Jul 2010
Location: quebec
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

nice time, very good, even with an elevated DA.

to encourage you, here's a video of the c6z 2006( 598 whp) from a friend that I drive in august 2010 on drag radial MT.

you car can travel easily in the same temp.
Old 06-03-2012, 08:44 PM
  #8  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

that is some nice runs and great numbers that car put down!!! I think he is around ~565whp at that altitude (~1500). I am at 510whp uncorrected I wish there was a track close to me with a 1000-3000DA I would be in the 10s easy....

car should be ready in few days. hope to get that 10sec slip! at 7000+DA

thanks for posting that vid. that car looks Great!
Old 06-04-2012, 06:18 PM
  #9  
11 Second Club
iTrader: (36)
 
98TADRIVER's Avatar
 
Join Date: May 2005
Location: South Jerzy
Posts: 1,449
Likes: 0
Received 0 Likes on 0 Posts

Default

come to Atco Raceway. only 33' above sea level
Old 06-07-2012, 01:18 AM
  #10  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by 98tadriver
come to atco raceway. Only 33' above sea level :d
Old 06-08-2012, 08:31 AM
  #11  
TECH Fanatic
iTrader: (55)
 
Mike Morris's Avatar
 
Join Date: Mar 2010
Location: Md/PA/FL
Posts: 1,602
Received 61 Likes on 50 Posts

Default

Nice job!
Old 06-11-2012, 09:12 AM
  #12  
TECH Regular
iTrader: (1)
 
redlineracing's Avatar
 
Join Date: Jan 2009
Location: Northwest, Indiana
Posts: 488
Likes: 0
Received 0 Likes on 0 Posts
Default

I expect to see you posting in the 10 second club soon!
Old 06-12-2012, 01:31 AM
  #13  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by redlineracing
I expect to see you posting in the 10 second club soon!
I hope so... I just got the car retuned. picked up 50whp!!!!! I had no idea i was down that much. I mean yes I knew the car was running rich with my fuel system and the knock but didnt think it will be that bad!!! I wish I had it tuned before the event oh well!! hopefully I will get it this Wed!!! cant wait!
Old 06-16-2012, 04:14 AM
  #14  
10 Second Club
Thread Starter
iTrader: (3)
 
walhan_qtr's Avatar
 
Join Date: Jun 2006
Location: Colorado
Posts: 379
Likes: 0
Received 0 Likes on 0 Posts

Default

went to the track two days ago. ran a best of 11.11 but the DA was about ~9000ft wish it was in the 6000-7000 that would have been my 10sec run. this is at 14-15deg of timing. car still has more in it. it will be tuned right for the next test and tune.


Thread Tools
Search this Thread
Quick Reply: My vette 11.1@127 N/A 6800+ DA



All times are GMT -5. The time now is 06:54 PM.