Ls turbo with truck manifold in S10???
05-26-2010, 03:17 PM
#1
On The Tree
Thread Starter
Join Date: May 2010
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Ls turbo with truck manifold in S10??? Has anybody on here every done an ls turbo swap in a s10 with the truck manifolds? If so can you post up some pic and advice. Any help will be greatly appreciated!
05-27-2010, 12:39 AM
#5
TECH Fanatic
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Local guy did it here and i'm preety possitive he had to get a different brake booster setup and not sure what he did with the steering shaft. Might be able to find some pics if you search Car Shops inc's s10 build...
My truck will be a 70mm in the bed on a 5.3. Used modified truck manifolds in the normal position. Need to figure out a smaller steering shaft as its very very close to the manifold lol... I'll update my build thread in the conversions forum once i get more stuff done...
My truck will be a 70mm in the bed on a 5.3. Used modified truck manifolds in the normal position. Need to figure out a smaller steering shaft as its very very close to the manifold lol... I'll update my build thread in the conversions forum once i get more stuff done...
05-27-2010, 08:30 PM
#7
TECH Fanatic
iTrader: (4)
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Ya I have a build thread goin in the conversions section, not too much in there on the turbo stuff yet though, should have some better stuff in there this coming week after I get all my piping back.
