Joshiedoom

iTrader: (4)

Finally ripped out ALL of the pcv lines on my 98. If you guys dont already know the 98s have a really gay location for the pcv system and can be affected by heat more easily. I ripped everybit of the old lines off. I mean everything.. Ill take more pics of the aftermath in daylight tommorow and edit this, essentially you unplug everything and rip it out..


Thanks to this thread I made a new housing....
http://www.ls1.com/forums/showthread...ht=pcv+housing

I bought...

5 foot of 3/8 fuel line/emissions hose.
new style pcv valve (1009 part number.. at otterzone)
3/8 T line fitting
1/2 to 3/8 air line adapter
Heater hose(for pcv valve/ air line adapter)
Clamps


Here is a given example of the ROT



and these are where you connect the new lines


then to this

and finally to this


done!

Viper

iTrader: (6)

In that thread they use a brass WATT piece; did you and if so what is the part #?

Joshiedoom

iTrader: (4)

yes.

http://www.hardwareworld.com/MPT-Ada...T-pYB7KRF.aspx

Viper

iTrader: (6)

This good for those that have done the LS6 PCV mod too. Thanks for the part #.

Joshiedoom

iTrader: (4)

I can do a really clean version of this to sell if anyone is interested!

crossroads

iTrader: (5)

i just bought the whole replacement from the dealership for 115.00 because of the rot

Joshiedoom

iTrader: (4)

Fail.

I really dont understand how my car was idleing correctly... its a totally different car at idle.

E V I L

iTrader: (6)

I would love to see full motor pictures of it all installed. I have one bypassed on the passenger side valve cover but wanting to fix this.

Did you get all of these parts at Autozone and what was the cost for everything? Thanks

Joshiedoom

iTrader: (4)

Cant really see much with it all tucked behind the cowl neatly.

Brass t-fitting=around 5 bucks..
hose=around 10-15 bucks..
pcv valve=7 bucks
1/2 to 3/8 air adapter=around 5 bucks.
Hose clamps=3 bucks

I really want to start making these

Joshiedoom

iTrader: (4)

Ive had a couple of people contact me locally and on a few websites. I can throw a few of these together as prototypes and sell them on the cheap for the first few sets. Im always looking for something that looks better