PCV valve housing
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Bama
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
PCV valve housing
The pcv valve housing on my car got ripped almost in half and it would not fit back on the line coming from the drivers side valve cover. This is on a 1998 model so the pcv valve is right in the middle of the motor on the passenger side.
I found this site here link. Now i moved the pcv valve housing right beside the oil fill cap and ran another hose from the housing to the side of the intake.
Is this ok or will it mess something up, since I moved the pcv from the stock location. Car runs fine but it seems so sluggish since I have done this.
Thanks.
I found this site here link. Now i moved the pcv valve housing right beside the oil fill cap and ran another hose from the housing to the side of the intake.
Is this ok or will it mess something up, since I moved the pcv from the stock location. Car runs fine but it seems so sluggish since I have done this.
Thanks.
#2
#4